After using the stainless steel shower faucet for a long time, it is easy to be blocked due to the water quality and quality. Many people don't know what to do. The following editor will share with you the treatment methods for the blockage of the stainless steel shower faucet.

1. Use acupuncture

If the stainless steel shower faucet in your house has some small holes blocked, let it out first, and you can see that the holes are blocked at the bottom. Then you have to turn on the stainless steel shower faucet head of the shower, and you can see that there are many small holes on the stainless steel shower faucet head like a shower head. This is where the water comes out. Then we first prepare a needle, and then use the needle to pierce the impurity in the perforation with the small hole that we just saw without water until there is no impurity in the hole. This method is the most straightforward, but be careful to puncture the stainless steel shower faucet hole.

2. Dip in vinegar

If your stainless steel shower faucet is blocked for a long time, and a lot of holes are blocked. Then using a needle to pierce one by one is obviously not showing up. In this case, it is recommended that you use acidification to remove dust to solve the problem of clogging of the stainless steel shower faucet of the shower. You need to prepare some white vinegar. Pour the vinegar into a basin so that the stainless steel shower faucet can be submerged. About ten minutes after soaking in vinegar, the scale in the stainless steel shower faucet can be removed.

3. Use lubricant

If the metal of the stainless steel shower faucet is rusted and the blockage is very serious, then use WD-40 rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. If your stainless steel shower faucet is not made of stainless steel, you may use this method.

4. Wipe with a towel

If your stainless steel shower faucet has been around for a certain number of years, and the appearance is relatively old. It is better to replace it with a new shower. The continued use of such a stainless steel shower faucet is not good for health. Because there may be a lot of harmful bacteria and impurities accumulated inside.

If the stainless steel shower faucet in your house is still in good condition, it can't be taken lightly. It must start with prevention. Usually, it is necessary to develop a good habit of showering and bathing. Before the end of each shower, use a towel to clean the water outlet of the stainless steel shower faucet of the shower to prevent the remaining scale. For the water outlet hole of the rubber material, you can rub it with your fingers. If it is made of stainless steel and copper, you can use a paper clip to unclog the water outlet.